A. K
B. K/2
C. 2K
D. KIA
E. UK
Advertisement
Related Mcqs:
- If a spring is cut down into two springs, the stiffness of cut springs will be _________________?
- A. half B. same C. double D. unpredictable E. none of the above...
- If two springs are in parallel then their overall stiffness will be_______________?
- A. half B. same C. double D. unpredictable E. none of the above...
- Spring stiffness is__________________?
- A. ratio of coil diameter to wire diameter B. load required to produce unit deflection C. its capability of storing energy D. its ability to absorb shocks E. none of the above...
- The deflection of a cantilever beam under load W is 8. If its width is halved, then the deflection under load W will be________________?
- A. 28 B. 8/2 C. 48 D. 8/4 E. none of the above...
- The maximum stress due to stress concentration in a bar having circular transverse hole, as compared to its static stress without hole will be_________________?
- A. same in both cases B. 2 times more C. 3 times more D. 4 times more E. unpredictable...
- A key made from a cylindrical disc having segmental cross-section, is known as______________?
- A. wood-ruff key B. feather key C. flat saddle key D. gib head key E. hollow saddle key...
- The permissible stress for carbon steel under static loading is generally taken as__________________?
- A. 2000-3000 kg/pm2 B. 3000-4000 kg/cm2 C. 4000-4500 kg/cm2 D. 7500-10,000 kg/cm2 E. 10,000-15,000 kg/cm2...
- Machine screws are________________?
- A. similar to small size tap bolts except that a greater variety of shapes of heads are available B. slotted for a screw driver and generally used with a nut C. used to prevent relative motion be-tween two parts D. similar to stud E. none of the above...
- Whether any core is required in wire ropes________________?
- A. yes B. no C. sometimes D. rarely E. very often...
- A bench vice has following type of threads____________________?
- A. metric B. square C. buttress D. acme E. BSW...
Advertisement